Apex Digital DT150 Manual Del Usuario página 11

Connection to TV
EN
Standard Install - RF Input / Output
Connect antenna wire to RF ANTENNA IN on the rear of the
DT150. Connect the supplied coax cable wire from the CH 3/4
terminal (RF Out) to RF ANTENNA INPUT on the rear of
your TV.
To view, tune Ch 3 or 4 on your TV, choose the channel that
does not have an active or strong signal. Slide the CH 3/4
switch located on the rear of the DT150.
Over-the-air Antenna
(Back of Digital Converter Box)
ANTENNA CH 3/4
RF Coaxial cable
to your TV
10