Forging Mount HY9001-B Manual De Instrucciones página 6

MUST BE
on to the next step.
2A-1
01
2A-2
2A-3
05
C
Position arm assembly/wall
plate [01] at your desired height.
Level the wall plate and mark
the hole locations.
Drill 3 pilot holes using a 3/8 in.
(10mm) diameter drill bit. Make
sure the depth is not less than
3 in.(75mm) .NEVER drill into
the mortar between blocks.
Use the hammer to wall anchors
[C] into the wall. Be sure the
the concrete surface.
3 in.(75mm)
ø3/8 in.(10mm)