Troubleshooting; Service Information - Black+Decker BDC8-LA Manual De Instrucciones

16 • ENGLISH
PROBLEM
Unit does not turn on.
Your cooler does not function
(plug is inserted, LED does not glow
after sliding the switch to cool or
heat).
Your cooler does not cool (plug
is inserted, LED glows).
Your cooler does not heat (plug
is inserted, LED glows).
Operation with a 12V socket
(Cigarette Lighter): The ignition
is on and the cooler is not working.
Pull the plug out of the socket and
make the following checks.

SERVICE INFORMATION

BLACK+DECKER offers a full network of company-owned and authorized service locations. All BLACK+DECKER
Service Centers are staffed with trained personnel to provide customers with efficient and reliable power tool service.
For more information about our authorized service centers and if you need technical advice, repair, or genuine factory
replacement parts, contact the BLACK+DECKER location nearest you, or visit us at www.BlackandDecker-la.com

TROUBLESHOOTING

POSSIBLE CAUSE
There is no voltage flowing
from the 12V socket (cigarette
lighter) in your vehicle.
The inner fan or the cooling
element is defective.
The inner fan or the heating
element is defective.
The cigarette lighter socket is
dirty. This results in a poor
electrical contact. The fuse of the
12V plug has blown. The vehicle
fuse has blown.
POSSIBLE SOLUTION
Make sure vehicle is running or the
ignition is in the "accessories" position.
Ensure adapter is correctly installed.
Check fuse in the tip of the cigarette
lighter adapter. Replace if needed.
Check fuse for the vehicle cigarette
lighter. Replace if needed.
The ignition must be switched
on in most vehicles for voltage
to flow at the cigarette lighter.
Try using another plug socket.
This can only be repaired by an
authorised customer services unit.
This can only be repaired by an
authorised customer services unit.
If the plug of your cooler becomes very
warm in the cigarette lighter socket,
either the socket must be cleaned or the
plug has not been
assembled correctly. Replace the fuse
(6.3A) in the 12V plug. Replace the
vehicle's 12V socket fuse (usually 15A).
(Please refer to the operating manual of
your vehicle)