PARTS OF THE HEATER
1. Chain Shot selector function.
2. Heat level switch.
3. Quartz tube resistance.
4. Protective grid.
SHOT CHAIN CONTROL
The chain of selector shot has 3 positions:
- 0 = OFF.
- 1 = 600W (Only one tube is on).
- 2 = 1200W (The two tubes light up).
QUARTZ TUBES
The infrared rays inside the quartz heating elements can reach temperatures up to 800°C in half a
minute. These are natural heating rays similar to the sunrays. Since the quartz heater does not
consume oxygen, it also does not produce carbon dioxide. Therefore, it is safe and healthy to use.
CLEANING AND MAINTENANCE
- Before cleaning, always unplug from the electric current and allow to cool completely.
- Always keep the protective grid clean without dust accumulations.
- Never use abrasive products or solvents.
- Clean with a cloth dampened in water with neutral soap.