Publicidad
Idiomas disponibles
Idiomas disponibles
**General Use. (Option to use manually without timers or thermostat).
- Turn on the heater by pressing the On / Off button.
The light (7) will goes on"Fan / M" and ambient air will blow.
The display shows the temperature of the room at that moment.
- For warm air, press the "Mode" button, the light (8) "I / W" will also light up.
- For hot air, press "Mode" again, the light (6) "II / H" will light up.
- To return to ambient air, press "Mode" again, the light (7) "Fan / M" will light up.
**Use With Thermostat. (This function is only possible with the remote control).
1. Turn on the device with the On / Off button.
The display shows the temperature of the room at that moment.
2. Set the desired temperature with the buttons "
Note.
- If you set a lower temperature than the one shown on the display when you turn it on, that is,
a temperature lower than the ambient temperature, the appliance will blow ambient air.
- For the appliance to blow hot air, it must set a temperature higher than the temperature
environment, a temperature higher than the one marked on the display when it is turned on.
- When the ambient temperature is 2 degrees lower than the selected temperature,
the heater starts heating in mode "I/W" (1000W).
- When the ambient temperature is 4 degrees lower than the selected temperature,
the heater starts heating in mode "II/H" (2000W).
** 24 hour function.
1. Turn on the device with the On / Off button.
2. Press the "24H" button on the remote control to activate the sleep timer for up to 24 hours.
3. Press the button as many times as necessary until you select the hours you want
the heater is on. (01 = 1hour; 02 = 2hours; ...... 24 = 24hours).
4. The light (4) "24H" will remain on.
5. To cancel the timer without turning off the device, press "24H" button until "00" is selected.
The light (4) "24H" will turn off.
Note.
The button "24H" on the remote control and the button (12) "TIMER" on the control panel of the
device, They do the same function.
** Day of the Week Timer Function. (Function only from the remote control).
1. Turn on the device with the "On / Off" button.
2. Press "W / Timer" and the light (8) "I / W" will light to select the day of the week.
(1=Monday; 2=Tuesday; ...... 7=Sunday).
3. Press "W / Timer" again, the light (6) "II / H" will light to select the start the hour o'clock.
4. Press "W / Timer" again, the light (7) "Fan / M" will light up to select the minutes.
5. Press "W / Timer" again, the light (6) "II / H" will light up and "- -" appears on the display,
this indicates that you must select the shutdown hour o'clock.
6. Press "W / Timer" again, the light (7) "Fan / M" will light up and "- -" appears on the display,
this indicates that you must select the minutes of the shutdown time.
7. Press "W / Timer" again and wait for the appliance to turn off.
The light (2) "W-Timer" will light up together with the Power light (9).
Note. Repeat the same steps to schedule more days of the week.
".
Publicidad
