Publicidad
Idiomas disponibles
Idiomas disponibles
Mowing
Your trimmer is ideal for mowing in places conventional lawn
mowers cannot reach. In the mowing position, keep the
SharperBlade
parallel to the ground. Avoid pressing the head
™
into the ground as this can scalp the ground and damage the
tool (Fig. 11).
Fig. 11
Sweeping
Fanning action can be used for quick and easy clean up. Keep
the SharperBlade
parallel to and above the surfaces being
™
swept and move the tool from side to side (Fig. 12).
Fig. 12
Edging
To convert your SharperBlade
Twist-N-Groom
locking collar downward and twist the handle
™
clockwise while holding the pole to adjust the trimmer head
to an angle of 180°. Ensure the locking collar snaps into place
(Fig. 13).
Fig. 13
Twist-N-Groom
locking collar
To convert your edger back to a trimmer, hold the handle, slide
the Twist-N-Groom
locking collar downward and twist the
™
handle counterclockwise while holding the pole to adjust the
trimmer head to an angle of 0°. Ensure the locking collar snaps
into place (Fig. 13).
Maintenance
m
WARNING!
Before performing any maintenance task,
cut off the electric power supply by disconnecting the plug
from the extension cord.
m
WARNING!
Always wear protective gloves during
maintenance tasks. Do not carry out maintenance when the
engine is running or hot.
• Regular cleaning and maintenance of you grass trimmer
+ edger will ensure efficiency and prolong the life of your
machine.
• After each cutting operation, take apart and clean out the
grass and soil from the whole trimmer + edger and guard.
• During operation, keep the air vents clean and free from
grass.
• Only use a cloth soaked with hot water and a soft brush to
clean the grass trimmer + edger.
• Do not spray or wet the appliance with water.
• Do not use detergents or solvents as these could ruin
the trimmer. The plastic parts can easily be damaged by
chemical agents.
9
trimmer into an edger, slide the
™
™
Publicidad
