Home Decorators Collection 365-187-170-Y Guía De Uso Y Cuidado página 5

Assembly
1
Attaching the support legs
□
Locate the base panel (C) and place on a soft surface to protect
the finish. Line up and insert the long connector (CC) on the
left and right support legs (V) into the unthreaded holes in the
center of the base panel (C).
□
Attach the left and right support legs (V & W) to the base
panel (C) by turning two bolts (AA) clockwise through the long
connectors (CC). Do not strip the bolts (AA) by overtightening.
□
Locate the top trim (M) and place them on a soft surface
to protect the finish.
□
Insert two short connectors (BB) into the top trim
(M) where indicated. Press down firmly until flush.
□
Attach the short connectors (BB) by inserting two bolts
(AA) and turning clockwise. Do not strip the bolts (AA) by
overtightening.
2
Attaching the front and back panels to
the base
□
Line up and insert two wood dowels (DD) into the unthreaded
holes in the side of the base panel (C). Line up the wood
dowels (DD) with the unthreaded holes in the front apron panel
(L). Press together until flush.
□
Line up the short and long connectors (BB & CC) in the base
assembly (C) with the unthreaded holes in the rear apron panel
(K). Press together until flush.
□
Insert eight bolts (AA) into the short and long connectors
(BB & CC) on the base assembly.
□
Attach the front and rear apron panels (L & K) by turning
the bolts (AA) clockwise. Do not strip the bolts (AA) by
overtightening.
V
V
AA
BB
M
BB
AA
K
AA
CC
DD
5
Please contact 1-800-986-3460 for further assistance
C
AA
CC
C
L
HOMEDEPOT.COM/HOMEDECORATORS