Worx WX641 Manual De Instrucciones página 9

TECHNICAL DATA
Type WX641 WX641.1 WX642 WX642.1 (635-644-designation of machinery, representative of
finishing sander)
Voltage
Power Input
No-load speed
Base size
Orbital diameter
Protection class
Machine weight
NOISE INFORMATION
A weighted sound pressure
A weighted sound power
K & K
pA wA
Wear ear protection
VIBRATION INFORMATION
Vibration total values (triax vector sum) determined according to EN 62841:
Typical weighted vibration
The declared vibration total value and the declared noise emission value have been measured in
accordance with a standard test method and may be used for comparing one tool with another.
The declared vibration total value and the declared noise emission value may also be used in a preliminary
assessment of exposure. .
WARNING: The vibration and noise emissions during actual use of the power tool can differ from the
declared value depending on the ways in which the tool is used especially what kind of workpiece is
processed dependant on the following examples and other variations on how the tool is used:
How the tool is used and the materials being cut or drilled.
The tool being in good condition and well maintained.
The use of the correct accessory for the tool and ensuring it is sharp and in good condition.
The tightness of the grip on the handles and if any anti vibration and noise accessories are used.
And the tool is being used as intended by its design and these instructions.
Finishing Sander
WX641 WX641.1
230-240V~50Hz
250W
12000/min
90x187mm
Vibration emission value a
Uncertainty K = 1.5m/s²
WX642 WX642.1
270W
6000-12000/min
1.6mm
/ll
2.0kg
= 6.341 m/s2
h
L : 83dB(A)
pA
L : 94dB(A)
wA
3.0dB(A)
9
EN