Publicidad
Idiomas disponibles
Idiomas disponibles
11. Make sure that there is no liquid or humidity in
the outlet where the appliance plug is inserted.
12. The appliance should be installed in such a way
that the electrical installation can be completely dis-
connected. Disconnection from power supply shall be
provided with a switch or an integrated fuse installed
on fixed power supply according to building code.
13. The power supply cable should not touch the hot
parts of the appliance.
14. Unplug the appliance during installation, mainte-
nance, cleaning, and repair.
15. The appliance is equipped with a type ''Y'' cord cable.
16. The appliance circuit breaker switches should be
in the workplace accessible to the end user while the
appliance is in place.
17. Fixed connections shall be connected to a power
supply enabling omnipolar disconnection. For appli-
ances with over voltage category below III, disconnec-
tion device shall be connected to fixed power supply
according to wiring code.
18. Do not remove ignition switches from the appli-
ance. Otherwise, live electric cables can be accessed.
It may cause an electric shock.
9
Publicidad
