Publicidad
Idiomas disponibles
Idiomas disponibles
OPERATION
Info: The drawing board must
be removed from the nebulizer
housing before use. To remove
the drawing board, push the
button and slide the drawing
board in the opposite direction from the cover arrow.
Nebulizer Operation
s NOTICE: The Neb-u-Tyke Neb-a-Doodle Nebulizer
Compressor is designed for intermittent use only. Do not
operate it continuously for more than 30 minutes for a
single use without turning it off and allowing a cooling
period of least 30 minutes.
1. Ensure that the ON/OFF switch is in the OFF position.
2. Plug the power cord into a properly grounded electrical
wall outlet.
3. Move the ON/OFF switch to the ON position to start the
compressor.
4. Place the nebulizer mouthpiece between teeth and
close mouth (or install the mask on face).
5. As aerosol starts flowing, inhale deeply and slowly
through mouthpiece (or mask).
WARNING: Never use a nebulizer with a clogged nozzle.
If the nozzle is clogged, the aerosol mist will be reduced,
altered or stopped, which will diminish or eliminate the
effectiveness of the treatment. If clogging occurs, replace
the nebulizer.
Info: If you need to interrupt treatment, move the ON/OFF
switch to the OFF position.
6. When the treatment is complete, move the ON/OFF
switch to the OFF position to turn off the compressor.
7. Unplug the compressor from power outlet.
8. Disconnect nebulizer from tubing.
9. Clean nebulizer as instructed in MAINTENANCE/
Cleaning the Nebulizer Cup.
JB0112-070-INS-LAB-RevB14
arrow
push button
1
2
11
Publicidad
