iOttie Easy One Touch 6 Manual Del Usuario página 5

Note
*The adhesive base is detachable from the mount arm and
features one-time use, semi-permanent tape. If the mount is
removed, it cannot be re-mounted. For this reason, an extra
adhesive base is included for your convenience.
*When mounting, it is recommended that the surface and
product be above 40°F.
*When removing the monitor mount, please use caution. We
recommend first removing the swivel arm from the adhesive
base and then slowly removing the base from the edge to
avoid damage.
*If you have trouble removing the base, we recommend using a
putty knife, library card, or credit card (with caution).
Adjusting the Mount
Cradle Knob
To rotate the cradle,
loosen the cradle knob.
Tighten to lock into
desired position.
Bottom Foot
To adjust the bottom
foot, pull it down or
push it up. There are 5
total height settings.
8 EN
Easy One Touch Mechanism
The Easy One Touch lock and release
mechanism makes it simply to mount and
retrieve your smartphone in seconds.
[ Mounting ]
1. Squeeze the release
bars.
2. Press your device
against the Easy
One Touch trigger
button.
The mount's arms
will automatically
close on contact.
[ Releasing ]
Squeeze the
release bars
again to release
your device.
9