Installation Rules; Standard Compliance - Vimar EIKON CO Stop 20422 Instrucciones De Uso

• Duration of device: 5 YEARS from the date of installation
• Protection level: IP40
• Operating temperature: from -10 °C to +40 °C
• Relative humidity tolerated: 90% max without condensation
• Self-extinguishing polycarbonate casing
• Terminals with screws for fixing to rigid and flexible conductors
2
up to 2,5 mm
• Storage conditions:
- Temperature: from –10 °C to +60 °C
- Relative humidity: 30-90%

5. Installation rules

• Installation should be carried out observing current installation
regulations for electrical systems in the country where the products
are installed.
• An omnipolar disconnection should be placed in the power sup-
ply network.
• Check whether the section of the power supply conductors
is adequate for the load powered.
8 - ENGLISH

6. Standard compliance

- LV directive
- EMC directive
- CEI UNI 70032 standard
NOTE
INSTALLATION OF THE CARBON MONOXIDE DETECTOR DOES
NOT EXEMPT USERS FROM RESPECTING ALL REGULATIONS
ON CHARACTERISTICS, INSTALLATION AND USE OF GAS
DEVICES, AREA VENTILATION AND EXHAUST EMISSIONS
PRESCRIBED BY CURRENT STANDARDS AND REGULATORY
PROVISIONS.