Publicidad
Idiomas disponibles
Idiomas disponibles
Single Lane Drive-Thru with Auto Hands Free
• A single beep is heard in the headset alerting the user a car is present at the speaker post or menu board.
• Do not press either T1 or T2. The microphone boom tip will flash green.
• Speak into the microphone to communicate with the customer.
• If you would like to mute the microphone during the order, press either L1 or L2 once.
The microphone boom tip will stop flashing.
• Press and release either L1 or L2 to speak with the customer again. The microphone boom tip flashes green.
• After the customer leaves the speaker post or menu board, the headset will stop transmitting
and the green light on the microphone boom tip will stop flashing.
Dual Lane Cross Mode
Note: In Cross Lane mode one headset will take orders for Lane 1 and Lane 2.
Push To Talk (PTT)
• A single beep (for Lane 1) and a double beep (for Lane 2) is heard in the headset alerting
the user a car is present at the speaker post or menu board.
• Press and hold L1 to speak to the customer in Lane 1. The microphone boom tip will flash green.
• Press and hold L2 to speak to the customer in Lane 2. The microphone boom tip will flash yellow.
• Speak into the microphone to communicate with the customer.
• After the customer leaves the speaker post or menu board, the headset will stop transmitting and
the green or yellow light on the microphone boom tip will stop flashing.
Hands Free Mode (Talk Lock)
• A single beep (for Lane 1) and a double beep (for Lane 2) is heard in the headset alerting the user
a car is present at the speaker post or menu board.
• Press and release L1 to speak to the customer in Lane 1. The microphone boom tip will flash green.
• Press and release L2 to speak to the customer in Lane 2. The microphone boom tip will flash yellow.
• Speak into the microphone to communicate with the customer.
• To mute the microphone during the order, press L1 for Lane 1 and L2 for Lane 2. You will see the light
on the microphone tip will stop flashing.
• To speak with the customer again press and release L1 for Lane 1. The microphone boom tip will flash green.
• To speak with the customer again press and release L2 for Lane 2. The microphone boom tip will flash yellow.
• After the customer leaves the speaker post, the headset will stop transmitting and the light on the
microphone boom tip will stop flashing.
OPERATING MANUAL
10
Publicidad
