Publicidad
Idiomas disponibles
Idiomas disponibles
INSTALLATION
4. To keep vibration and noise within minimum level when the
dryer is in use, it must be placed on a firm and level surface.
5. The feet must never be removed, and the appliance should not
be placed on a long-pile carpet, wooden slats or similar that may
cause heat build-up which could interfere with the operation of
the appliance.
Level Adjusting
Once in its permanent operating position,
check that the dryer is absolutely level with
the aid of a spirit level. If it is not, adjust the
feet by hand or using a tool.
Power Supply Connection
1. Make sure that the voltage of the power supply is the same as
the electric specification.
2. Do not connect the dryer with the power connection board, a
universal plug or socket, do not use multi-plug adapters and
extension cables.
12
V.1
Publicidad
