Roan bass next Manual De Instrucciones página 7

WARRANTY TERMS AND CONDITIONS
1. P.P.U.H. ROAN grants a 12-month warranty for the purchased product starting
from the purchase date.
2. Any complaints shall be reported to the sale point, where the product was
purchased.
3. Warranty card must be presented to admit the complaint.
4. Physical defects of the product detected during the warranty period should
be removed free of charge within 14 days of the product delivery through the
agency of the seller to P.P.U.H. ROAN.
5. Repairs are carried out by P.P.U.H. ROAN or the service provider indicated
by the seller.
6. The warranty does not cover:
• damages caused by the user
• damages due to failure to follow recommendations, warnings, and limita-
tions included in the user manual and on the product components
• naturally wearing off components, such as: tyres, inner tube, tyre thread,
materials used on handles, structure and colour of fabrics, materials exposed
to abrasions, bushing in tyres, and printings
• damages resulting from failure to follow maintenance conditions, e.g.:
corrosion, change of the upholstery colour or colour of plastic elements due
to long term exposure to sunrays or too low temperatures, any looseness,
noises such as squeaking/creaking, damages to mechanisms due to dirt
• damages caused by repairs carried out by unauthorized persons
• vibrations of the wheels on uneven surfaces is a normal phenomenon for
this type of construction. To minimize vibrations, use blockades on the wheels
for straight ride.
• damages and grime resulting from improper packaging of the product during
shipment by courier company (in the case of mail ordering). The product must
be packed into an original cardboard or its substitute adjusted to the size of
the product so there is no unnecessary loose space, and so that no component
sticks out or make buldge in the packaging.
7. Warranty period is extended by the time of repair.
8. Manner of repair is determined by the party granting the warranty.
9. Product under the complaint should be provided clean.
10. The warranty covers the territory of the European Union.
11. The warranty covers the territory of the country in which the stroller was
bought.
MAINTENANCE
1. The product requires periodic maintenance.
2. Metal elements of the stroller may be cleaned with a wet cloth and use of
a mild cleaning agent to prevent corrosion. Dry after cleaning.
3. The upholstery of the stroller may be cleaned with a wet cloth and use of
a mild cleaning agent. After cleaning, dry the upholstery hanging it in the place
where it is not exposed to sunrays for a long time, or leave it unfolded in a
well-ventilated area.
4. Do not wash the elements of the upholstery in the washing machine or do
not whirl it mechanically.
5. Do not use bleach. Use only mild cleaning agents.
6. Do not expose the product to sunrays for a long time as the upholstery and
plastic components may be damaged.
7. Movable components should be periodically maintained with use of agents
such as WD-40.
8. Check regularly location of the safety belts and other adjustable elements.
9. Do not use grease in places to which sand may enter. Check regularly loca-
tion of the safety belts and other adjustable elements.
10. Avoid contact with salty water (sea water, sea breeze, road salt) as it may
cause corrosion.
11. Permitted range of temperatures for use of the stroller: from -5 to +35 C
NOTE! Always lock the safety parking device when leaving the stroller on in-
clined surface.
NOTE! Parking device is not intended for slowing down. Lock it when the
stroller is completely stopped.
NOTE! Parking device should be activated when putting the child in or taking
the child out of the stroller.
NOTE! The stroller is not intended for running.
NOTE! Frame of the stroller is compatible with the carrycot, seat unit and the
car seat delivered by the manufacturer.
NOTE! Handles for carrying the carrycot should be put outside of it when using
the carrycot.
NOTE! When using the car seat on the frame of the stroller, remember that
this stroller does not substitute cradle or baby cot. If the child wants to sleep,
it is recommended to put it in a carrycot, cradle or baby cot.
OPERATION MANUAL
UNFOLDING THE PRAM
To unfold the pram, put it flat on the ground (Fig. 1a, 1b), and pull
vividly the handle up until the folding mechanism is locked (Fig. 2, 3).
NOTE! Before starting to use the pram, make sure that it has been
correctly unfolded.
ASSEMBLING AND DISASSEMBLING
THE REAR WHEELS
To disassemble the rear wheels, press down the button in the central
part of the wheel (Fig. 4) and remove the wheels from the axle (Fig. 5).
To assemble them again, press the button down and slide the wheels
onto the axle tili they get locked.
NOTE! Before starting to use the pram, make sure that all the wheels
have been assembled correctly.
ASSEMBLY OF FRONT SWIVELLING WHEELS
Insert front set of the wheel onto the hub (Fig. 6) until it is locked in
place (you will hear a clear click sound, (Fig. 7). Make sure the wheel
is properly secured. Repeat the steps for the second wheel. Front
wheels are equipped in a locking mechanism that can lock them to ride
forward only. To lock the wheel, turn the ring of the locking me-
chanism outside (symbol of the locked padlock, (Fig. 8).
DISASSEMBLY OF FRONT SWIVELLING WHEELS
Press the button of the wheel locking mechanism (fig. 9) and slide the
wheel off the hub (fig. 10). Repeat the steps for the second wheel.
HANDLE HEIGHT ADJUSTMENT
It is possible to adjust the pram handle height. To perform the adjust-
ment, press down the round buttons on both sides of the handle at
the upper part, and then adjust the right height (Fig. 11).
PARKING BRAKE
The pram is equipped with a rear parking brake. To engage the brake,
press its lever down (Fig. 12). In order to disengage it, lift the lever.
NOTE! Before starting to push the pram, make sure that the brake has
been disengaged.
NOTE! Always engage the safety brake, when you leave the pram on
an inclined surface.
NOTE! The brake is not designed for slowing down. It should be en-
gaged after the pram has been stopped completely.
NOTE! The pram is not designed for running.
ATTACHING AND REMOVING THE CARRYCOT
In order to attach the carrycot press it into the pram frame so that the
adapters on both sides of the carrycot lock onto the catches on the
O
pram frame (Fig. 13a, 13b). They will lock in place automatically.
ATTENTION! Make sure the carrycot is attached correctly priorto use.
To remove the carrycot press the buttons on the adapters at the sides
of the carrycot (Fig. 14) and pull the carrycot.
ASSEMBLING AND DISASSEMBLING THE SEAT
The seat should be assembled and disassembled the same way as for
the bassinet (see ASSEMBLING AND DISASSEMBLING THE BASSINET
Fig. 15). The seat may be assembled with its front and back facing
the movement direction.
NOTE! Before starting to use the pram make sure that the seat has
been assembled correctly.
GB
7