AENO RC4S Guia De Inicio Rapido página 12

1. dry cleaning. Press the "Start/Stop" button to start the cleaning;
2. wet cleaning (Fig. D). Remove the container from the body of the vacuum cleaner
by first clamping the latch on the container. Open the water tank, fill at least 2/3 of
the tank with purified water and close the valve firmly. Attach the fabric overlay to
the module. Fasten the module with the overlay to the container. Insert the
container back into the body of the vacuum cleaner. The device is ready for the
wet cleaning. Press the "Start/Stop" button to start the cleaning. You can
additionally control the water supply from the AENO application.
Press the "Start/Stop" button again to pause the cleaning. If no operation is performed
for 10 minutes, the vacuum cleaner enters sleep mode and all indicators turn off. You
can resume cleaning by pressing the "Start/Stop" button again. After pressing the
"Base" button
NOTE. Automatically returns to the base to recharge after you finish the
cleaning and when the battery is low. After recharging, the cleaner will resume
the cleaning from where it was interrupted.
Connecting to the AENO mobile app
• Connect your smartphone to a Wi-Fi network (2.4 GHz).
• Connect the charging base to the mains. Make sure that the container is
inserted into the body of the vacuum cleaner. Connect the pins on the
container to the pins on the base.
• Log in to your AENO app account or register a new one. You can download
the application from Google Play or from App Store.
• On the main application screen, tap "Add a device" or "+" and "Add a device".
In the window that opens, select the "Vacuum Cleaner" category.
NOTE. If a system prompts you to turn on any functions on your smartphone, do so.
• Enter your Wi-Fi network name and password if the fields are not filled in
automatically. Click the "Next" button.
• On the control panel of the vacuum cleaner press and hold the "Base" button
until the button's light starts flashing. On the smartphone screen, check the
"LED indicator blinks" box and tap "Next".
aeno.com/documents
the vacuum cleaner returns to the base for charging.
12