Publicidad
Idiomas disponibles
Idiomas disponibles
Ch 9：
Ch 10：
Ch 11：
Ch 12：
CAUTIONS
Prevention of electric shock
The electrical connection must only be carried out by qualified personal. Before installing, make sure
you use the same power voltage marked in the SIDIUS ZOOM 555 (100-240V/50-60Hz). Each device
must be properly grounded and installed in accordance with the relevant standards. Don't use the
device in a lightning storm or wet environment.
To prevent burning of fire
1. Never install the device directly on the surface of ordinary combustible material.
2. The equipment must be installed away from inflammable and explosive materials.
3. Keep at last 0,5 m around the unit to ventilation purpose.
4. Do not place any object on the lens.
5. Do not replace with non-original spare parts. Contact your MARK dealer.
Unpacking
Note: Before unpacking, check it for possible damage that might have occurred during transportation
or not. If you find any damage, please do not use the unit and contact the MARK PRO dealer.
Graphics effect
Graphics transformation
speed
CTO
Reset
Static graphics 4
Static graphics 5
Static graphics 6
Static graphics 7
Dynamic Graphics 1
Dynamic Graphics 2
Dynamic Graphics 3
Dynamic Graphics 4
Dynamic Graphics 5
Dynamic Graphics 6
NO FUNCTION
10000K-2500K
No effect
Auto 1
Auto 2
Reset
30----39
40----49
50----59
60----69
70----79
80----89
90----99
100----109
110----119
120----255
0----255
0---9
10---255
0----49
50----99
100----149
201----255
9
Publicidad
