DeLOCK 66466 Manual Del Usuario página 3

English
Package content
• Receiver
• Transmitter
• 2 x LC Duplex coupler
• User manual
Safety instructions
• Protect the product against moisture
• Protect the product against direct sunlight
Installation
1. Connect the host and device units with an OM3 LC Duplex
network cable (max. 100 m) using the included couplers.
2.
Connect the USB-A male (host side) to the computer.
3.
Connect the device to the USB-A female (device side).
4. Connect the USB-A plug of the receiver to a suitable USB-A
power source, e.g. a USB port or a USB power supply.
5.
The device should be recognized by the computer.
Note
The extender is not backward compatible; transfer of USB 2.0 or
USB 1.1 data is not supported.
Please use a multi-mode OM3 (or better) cable; single-mode cable
is not supported.
Please make sure to connect the USB Type-A male side first, then
connect Type-A female side and power supply cord.
-3-