Publicidad
Idiomas disponibles
Idiomas disponibles
INSTRUCTION MANUAL
SPECIFICATIONS
Model
Element
Polar Patter
Frequency Response
Sensitivity
Impedance
Operating voltage
Consumption
Signal to Noise Ratio
Max. Input SPL
Weigth
Dimensions (mm)
Finish
Colour
Accessories
INSTALLATION GUIDE
Place the microphone on a flat unobstructed surface.
Typical placement of the microphone is at arm's length from the user. The front should be
facing the user. Ideally the sound source should be 60º above the plane of the mounting
surface.
Place one microphone in front of each person, or one between every two people.
PHM-902 Version 1.0
All manuals and user guides at all-guides.com
Power module and Ø 3 mm x 7 m cable with XLR
1/1
WARNING:
⋅ Installation by qualified personnel only.
⋅ Avoid
exposing
temperatures, humidity, mechanical vibration and dust
for long periods of time.
⋅ There are no user-adjustable parts inside the unit,
please do not open or make any adjustments.
⋅ Do not use benzene, alcohol, and other chemicals in
cleaning the unit.
PHM-902
Electret (condenser)
Semi-cardioid
(cardioid above the mounting surface)
50 ~ 18.000 Hz
-68 dB ±3 dB a 1 kHz
250 Ω ±30 % (balanced)
9 V ~ 52 V DC (phantom power)
1,5 V UM3/AA (battery)
< 2 mA
> 65 dB
130 dB (1 kHz a 1 % THD)
141 g
83,7 (length) x 68,7 (width) x 17 (height)
Base: zinc die-cast
Windscreen: iron
Input Jack: nickel
Black
female plug at both ends
MICROPHONE
PHM-902
the
equipment
to
extreme
Publicidad
