BTI PROFILINE SH 11 E Manual Original página 21

Technical Data
Demolition Hammer
Art. No.
Rated power input
Impact rate
Impact energy per stroke
Chisel positions
Chiselling capacity in
concrete of medium
hardness
Tool holder
Lubrication
Weight according to
EPTA-Procedure
01/2003
Protection class
The values given are valid for nominal voltages [U] of
230/240 V. For lower voltage and models for specific coun-
tries, these values can vary.
Product Features
The numbering of the product features refers to the
illustration of the machine on the graphics page.
1 Dust protection cap
2 Locking sleeve
3 Chisel adjustment ring
4 On/Off switch
5 Thumbwheel for preselection of impact rate
6 Service indicator
7 Auxiliary handle (insulated gripping surface)
8 Knurled nut for auxiliary handle
9 Handle (insulated gripping surface)
* The accessories illustrated or described are not
included as standard delivery.
Noise/Vibration Information
Measured sound values determined according to
2000/14/EC.
Typically the A-weighted noise levels of the product
are: Sound pressure level 89 dB(A); sound power
level 100 dB(A). Uncertainty K=3 dB.
Wear hearing protection!
Vibration total values (triax vector sum) determined
according to EN 60745:
Chiselling: Vibration emission value a
Uncertainty K=1.5 m/s
1 619 929 864 • 1.2.10
BTI-SH 11 E
9015860
W
-1
min 900 – 1890
J
kg/h
SDS-max
permanent
lubrication
kg
=16 m/s
h
2
.
The vibration emission level given in this information
sheet has been measured in accordance with a stand-
ardised test given in EN 60745 and may be used to
compare one tool with another. It may be used for a
preliminary assessment of exposure.
The declared vibration emission level represents the
1500
main applications of the tool. However if the tool is
used for different applications, with different accesso-
6 – 25
ries or poorly maintained, the vibration emission may
12
differ. This may significantly increase the exposure
level over the total working period.
An estimation of the level of exposure to vibration
490
should also take into account the times when the tool
is switched off or when it is running but not actually
Central
doing the job. This may significantly reduce the expo-
sure level over the total working period.
Identify additional safety measures to protect the
operator from the effects of vibration such as: main-
tain the tool and the accessories, keep the hands
10.1
warm, organisation of work patterns.
/ II
Declaration of Conformity
We declare under our sole responsibility that the
product described under "Technical Data" is in con-
formity with the following standards or standardization
documents: EN 60745 according to the provisions of
the directives
2000/14/EC.
2000/14/EC: Guaranteed sound power level
105 dB(A).
according to Annex VI.
Notified body:
TÜV NORD CERT GmbH & Co. KG,
Am TÜV 1, 30519 Hannover
Jürgen Dietz
General Manager
BTI Befestigungstechnik GmbH & Co. KG
74653 Ingelfingen
Assembly
Before any work on the machine itself, pull
the mains plug.
2
,
2004/108/EC,
Conformity assessment
i. V. Günter Hub
Purchasing Manager
2006/42/EC,
procedure
English | 21