Publicidad
Idiomas disponibles
Idiomas disponibles
Enlaces rápidos
H-10799
SOLDERING STATION
• Ensure safety devices function properly before use.
• Ensure moving parts are not sticking or damaged.
• Only use indoors and at room temperature.
• Protect unit against moisture and direct sunlight.
• Connecting control unit incorrectly poses a risk of
injury due to electric shock and can damage the
device.
• Only connect Weller® brand tools.
• If power supply cord is damaged, it must be
replaced with a specially prefabricated power
supply cord. Contact Uline customer service at
1-800-295-5510.
• Avoid touching earthed objects such as pipes,
heaters, cookers and refrigerators while using
product.
• Do not use soldering tool in a damp or wet
environment.
• Never work on voltage-carrying parts.
• Connect to properly grounded outlets only.
• Tool and safety holder may still be hot long after
unit has been turned off.
#
DESCRIPTION
1
Digital Station
2
Soldering Iron with Heat Resistant Cable
3
Chisel Style Solder Iron Tip
4
120 Volt Power Cord
5
Conical Support with Safety Rest Base
6
Cleaning Sponge
PAGE 1 OF 6
1-800-295-5510
uline.com
SAFETY
• Do not touch soldering tip during or after use.
• Keep away from flammable objects.
• Wear appropriate protective clothing to protect
against burns.
• Always wear eye protection when using soldering
station.
• When working with adhesives, special attention
must be paid to the warning information provided
by the adhesive manufacturer.
• Always keep combustible, flammable objects,
liquids or gases far away from soldering iron and
safety holder.
• Store soldering station in a dry, high or locked area
out of reach of children.
• Ensure unused soldering tools are free of voltage
and depressurized.
• Ensure machine is switched off before plugging in.
• Do not use cable for purposes other than intended.
• Never carry the unit by the cable.
• Do not pull cable to unplug from outlet.
• Protect cable against heat, oil and sharp edges.
PARTS
Para Español, vea páginas 3-4.
Pour le français, consulter les pages 5-6.
3
2
5
6
4
1
0623 IH-10799
Publicidad
Resumen de contenidos para Uline H-10799
- Página 1 • Always keep combustible, flammable objects, replaced with a specially prefabricated power liquids or gases far away from soldering iron and supply cord. Contact Uline customer service at safety holder. 1-800-295-5510. • Store soldering station in a dry, high or locked area •...
- Página 2 1. Unscrew and remove the cover retaining the solder tip. Tip will fall out of the iron. (See Figure 5) Cover 2. Replace with desired compatible tip and secure with previously removed cover. 1-800-295-5510 uline.com PAGE 2 OF 6 0623 IH-10799...
- Página 3 Comuníquese a • Guarde la estación para soldar en un área seca, Servicio a Clientes de Uline al 800-295-5510. alta o cerrada y fuera del alcance de los niños. • Al usar el producto, evite tocar objetos con •...
- Página 4 1. Desenrosque y retire la cubierta que retiene la punta del cautín. La punta se caerá del cautín. (Vea Diagrama 5) 2. Reemplace con la punta compatible deseada y asegúrela con la cubierta que retiró. 800-295-5510 uline.mx PAGE 4 OF 6 0623 IH-10799...
- Página 5 Contactez le service à hauteur ou fermé à clé, hors de portée des enfants. la clientèle de Uline au 1 800 295-5510. • Assurez-vous que les outils de soudage non utilisés • Évitez de toucher des objets mis à la terre tels sont hors tension et dépressurisés.
- Página 6 1. Dévissez et retirez le couvercle qui retient la pointe à souder. La pointe se détachera du fer. (Voir Figure 5) 2. Remplacez-la par la pointe compatible souhaitée et fixez celle-ci avec le couvercle précédemment retiré. 1-800-295-5510 uline.ca PAGE 6 OF 6 0623 IH-10799...