Descargar Imprimir esta página

Bontempi JE 4525 Manual De Instrucciones página 2

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 5
E N G L I S H
POWER SUPPLY
Use a screwdriver to open the batte-
ry compartment. Insert 3x 1.5 V bat-
teries R6/AA (not supplied), ensu-
ring correct polarity. Re-fit battery
cover. Replace batteries when the
quality of flash becomes bad. Use
alkaline batteries to obtain a longer
duration.
ATTENTION – BATTERY CARE
• Non-rechargeable batteries are not to be recharged. • Rechargeable batteries must be removed from the toy
before being charged. • Rechargeable batteries are only to be charged under adult supervision. • Different
types of batteries or new and old batteries are not to be mixed. • Use only batteries of the same or equivalent
type. • Batteries are to be inserted with correct polarity. • Remove exhausted batteries to prevent leakage. • Do
not short-circuit supply terminals.• Remove batteries during long periods of non-use
WASTE DISPOSAL STANDARDS
For information regarding the disposal of the items mentioned here below, please refer to
Council Administration office regarding specialised waste collection centres.
1. DISPOSAL OF BATTERIES - Protect the environment by disposing of batteries in the special
containers provided for this use.
2. PACKAGING DISPOSAL - Take the paper, cardboard and corrugated board to the appropriate waste collec-
tion centres. Plastic material must be placed in the relevant collection containers.
The symbols indicating the various types of plastic are:
Key for the different types of plastic materials:
PET= Polyethylene terephtalate • PE= Polyethylene, code 02 for PE-HD, 04 for PE-LD • PVC =Polyvinyl chloride
• PP= Polypropylene • PS= Polystyrene, Polystyrene foam • O= Other polymers (ABS, Laminates, etc.)
3. DISPOSING OF ELECTRICAL APPLIANCES - The wheelie bin symbol with a cross indicates that the product
must not be disposed of in the domestic waste at the end of its useful life. Instead, it should be taken
to your nearest designated collection point or recycling facility. Alternatively, check with your retai-
ler and return the product when buying a replacement, on a one-to-one basis or as free of charge
in case the size is smaller than 25cm. Appropriate disposal promotes the recycling of parts and
materials, as well as helping to protect the environment and human health. Under current legisla-
tion, strict penalties are enforced against those disposing of products illegally. For more information about the
collection of special waste, contact your Local Authority.
TROUBLE SHOOTING GUIDE
Problem
The instrument doesn't work
or distorted sound.
ATTENTION: in the case of malfunctioning remove and re-insert the batteries
GB - ICOM S.p.A. reserves all rights to modify specifications of this product without notice.
ATTENTION: Do not use alcohol, solvents or similar chemical substances for cleaning. Use a soft cloth dampened in a bland solution
of water and neutral detergent. Dip the cloth in the solution and then wring it until it is nearly dry.
2
Solution
Batteries low – fit new batteries.
Batteries incorrectly fitted – check.
Read and keep this manual for future reference.
01
02
03
05
PET
PE
PVC
PP
R6/AA 1.5V
R6/AA 1.5V
R6/AA 1.5V
R6/AA 1.5V
R6/AA 1.5V
R6/AA 1.5V
06
07
PS
O

Publicidad

loading

Productos relacionados para Bontempi JE 4525