Optional Camera and
Microphone Unit (not supplied)
Cable Management
Using Soundbar (not supplied)
(XR-50X92K)
Recommended (in front of the TV)
Place the soundbar (not supplied) in front of the
TV's Table-Top Stand.
4
GB
Alternate (on the Table-Top Stand)
If there is not enough space to place the
soundbar in front of the TV, attach the rubber
feet
(supplied with the TV) to the bottom of
the soundbar (not supplied) and place the
soundbar on top of the Table-Top Stand.
Note
• Make sure that the soundbar height is not blocking
the path between the remote control and the IR
sensor on your TV.
• By using rubber feet, the sound condition may vary
depending on soundbar model.
• Do not cover the ventilation hole and the
identification label with the rubber feet.
• Be sure to store the removed rubber feet in a safe
place, keeping them away from children. (e.g., When
sending the soundbar for repair)
Troubleshooting
General troubleshooting for issues like: black
screen, no sound, frozen picture, TV does not
respond, or network is lost, do the following
steps.
1
Restart your TV by pressing the power button
on the remote control for about five seconds.
The TV will restart. If the TV does not recover,
try unplugging the mains lead then press the
power button on the TV and release it. Wait
for two minutes, and plug in the mains lead.
Or, press the power button on the TV for
about 40 seconds until the TV turns off.