Publicidad
Idiomas disponibles
Idiomas disponibles
REMARKS:
1.
The first 24 hours after installation, it is normal to notice a slight noise during fan operation. After this
adjustment period, the rumor will disappear.
2. The light of the fan turned off through the remote control remains in stand-by mode. It will be completely
off if power is cut off through the wall switch.
3. If you are installing the fan in a false ceiling made of plaster, Wood or metal, the noise of the fan may be
amplified due to the existing air chamber. We recommend adding an insulating material in the ceiling
chamber to mitigate the transmission of sound.
4. From the wall switch you can also use the lighting functions of the K button (10).
REMOTE CONTROL USERS GUIDE
Notices
1. Each remote control is originally synchronized with its own fan. Another remote control will not
make the fan work. Do not swap them.
2. To link the remote control with the fan light, immediately after turning the fan on, press and hold
the F/R button for a few seconds until a beep sounds.
3. When the remote control fails, Please check whether the switch batteries are in good contact,
whether they are fixed properly and whether they run out of use.
Fan OFF
Nature wind. (Changing speed/Fan ON: Turn
on in the last F/R function.)
Fan ON. Turn on at the desired speed
Foward / Reverse
Ligth ON / OFF alternate color change
Reduce brightness
Increase brightness
Lower color temperatura forward
Raise color temperatura fordward
Selector 3000k, 4500k, 6000k
Fan timer
2 1,5V AAA battery
16
Publicidad
