Publicidad
Idiomas disponibles
Idiomas disponibles
Starting Your Job (Continued)
• Install the standard nozzle and turn on the electric duster with the higher speed setting.
Roughly dust the surface of the computer (or other desired devices).
• Install the standard brush onto the standard nozzle to remove difficult dirts.
• Switch to tapered flow nozzle with straw adapter and detail brush installed to clean
crawl places.
• Switch to standard nozzle again to dust out the whole surface.
Used As a Hair Dryer for Pet (See Page 4: Parts Description)
Recommended nozzles: standard nozzle and air blade nozzle.
• Force Drying Stage: In this stage, pets have been bathed and are saturated with heavy
water. High-pressure airflow can remove the heavy water efficiently. You can achieve
high-pressure air by installing the standard nozzle or air blade nozzle and dry at the
higher speed setting of the machine.
• Finish Stage: In this stage, most of the heavy water on the pets have been removed in
the force drying stage, but there is still some moisture. Heated-temperature and high-
volume soft airflow can help to vaporize the rest of the moisture or to fluff and style.
Switch to the lower speed setting and dry. For long coated pets, use the air blade nozzle
to prevent knotting in the drying process.
Used As an Air Pump/Inflating (See Page 4: Parts Description)
• Install the matched air pump adapter onto the electric duster.
• Open the valve and insert the adapter into the valve until the adapter cover the whole
intake.
• Turn on the machine with the lower speed setting (recommended) and start inflate. Use
your hands to feel if there is enough air.
• Turn off the machine when finished. Close the valve.
Stem Valves (Inner diameter ≥ ¼ inch / 6 mm)
English - 9
Publicidad
