Master MT Dry 500 Manual De Uso Y Mantenimiento página 27

Place, as shown in the following image, the two previously removed handles, together with the stainless steel and
nylon washers. The Nylon washers are the ones that must be in direct contact with the painted frame.
Once the main body of the equipment is fixed to the frame, place the plastic tray in the lower slots until the rear
plate of the tray holds it in the desired position, as shown in the following image.
Finally, connect the machine's power cable to the mains.
IMPORTANT: Make sure that the electric cable is perfectly positioned, without forming loops that
could cause you to trip.
27
www.masterproducts.es