Installation and Operation Guide
Nozzle Installation
For model A-5:
Attach the nozzle onto the air outlet of the hose.
The standard brush must be attached onto the standard nozzle.
The tapered flow nozzle, straw adapter and the detail brush should be used
together.
• Attach the straw adapter onto the tapered flow nozzle.
• Insert the detail brush inside the other end of the straw adapter.
• Attach the whole set of the nozzles onto the hose.
For model A-12 and A-16:
Connect the nozzle connector in between the nozzle adapter and the nozzle.
(Continued)
English - 7