Dolmar DT 2000 Instrucciones De Montaje página 9

schematic diagram
Adjusting the wheels
The wheel spacing on the guide trolley may be adjusted if
necessary. To be able to cut very closely to obstacles (e.g.
kerbstones, masonry, walls, etc.), mount the power cut with
the cutting device in the outer position (see operating instruc-
tions for the power cut) on the guide trolley.
Loose screws (1) of the axle fixing and push wheel axle right
over to the left.
1
Tighten screws (1) firmly.
L
9