Zbeamz BS1500 STROBE Manual Del Usuario página 28

A000-Axxx
4 / 5 / 7 / 13 / 15 / 31
Channel 4 mode
Channel 5 mode
Channel 7 mode
Channel 13 mode
Channel 15 mode
Channel 31 mode
Auto 00 Speed <000> to <255>
Auto 01
Auto 02
....
Auto 036
Dimmer 000-255
Strobe 000-255
White 000-255
Blue 000-255
Green 000-255
Red 000-255
Strobe 000-255
Dimmer 000-255
Yes
No
On
60s
120s
300s
Temp 1 xxºC
Temp 2 xxºC
Test 1
Test 2
Reset Yes / No
Version
<Curve 0>
<Curve 1>
<Curve 2>
<Curve 3>
<Speed 0>
<Speed 1>
......
<Speed 7>
DMX address setting
Select DMX channel mode
Manual setting of DMX values for each DMX Channel
Select auto program and adjust auto run speed
Adjust dimmer level and switch on strobe at different speed for
auto run
Manual setting
Select master or slave mode
Switch off master / slave function
Display background light always stays on
Display background light turns off after 60s
Display background light turns off after 120s
Display background light turns off after 300s
Display current temperature on LED panel
Display current temperature on
Test mode without flash
Test mode with flash
Restore factory settings
Display current version
Select dimming curve
Select fade time