Glacier bay HD67738W-6001 Guía De Instalación Y Cuidado página 7

Installation (continued)
7
Installing the lift rod
□
Slide the lift rod (S) down into the lift rod strap (Q) until it clicks into the lift rod strap (Q).
□
Slide the clip (R) downward until it secures with the horizontal rod (P).
NOTE: If a shorter lift rod (S) is required for your installation, you may call Glacier Bay Customer service for assistance.
8
Adjusting the length of lift rod strap
□ If the pop up lift rod strap (Q) is interfering with your installation, as shown in the Fig 1, the lift rod strap (Q)
can be cut shorter.
□
Once you have identi ed the proper hole in the lift rod strap (Q) that is necessary for your installation, you
may cut off the bottom portion (1) of the lift rod strap (Q) by snapping off with pliers or cut off with a saw
at the cutting point (2), as shown in the Fig 2. Ensure the clip (R) does not slide off the lift rod strap (Q).
Fig 1
S
1
S
Q
Q
Q
Q
Q
R
7
Please contact 1-855-HD-GLACIER for further assistance.
J
Q
R
2
P
1
2
Fig 2
HOMEDEPOT.COM