Publicidad
Idiomas disponibles
Idiomas disponibles
Installation
1
Installing the faucet assembly
CAUTION: Always shut off the water supply before
removing an existing faucet or replacing any part of a
faucet. Open the faucet handle to relieve water pressure
and ensure that the water is completely shut off.
□
Shut off the water supply.
□
Place the faucet assembly (A) through the
mounting holes in the sink.
A
4
2
Securing the faucet assembly
□
Secure the spout with the rubber washer (E),
metal washer (F) and nut (G).
□
Secure the valves with the washer (B) and nut (C).
Thread the nut (C) onto the mounting shank. Lock
the nut (C) into position by tightening the screws
(D). Do not overtighten.
B
C
D
E
F
G
Publicidad
