Publicidad
Idiomas disponibles
Idiomas disponibles
UV-C lamp
To activate the UV-C LAMP feature, press the ON button. To deactivate it, press the OFF button.
With the photocatalytic filter, the UV-C lamps eliminate the VOCs present in glues, varnishes,
paints, furniture and household cleaning products. These lamps use a 254 nm light wavelength
which eliminates micro-organisms (bacteria, viruses, etc.).
Planner
To activate the PLANNER feature, press the ON button. To deactivate it, press the OFF button.
To customise the operation of your EOLIS Air Manager for the week, press the PLANNER icon.
Then you can play with it:
This example shows that all Thursdays, the unit operates as follows:
- From midnight to 6:00 a.m.: Operating in Active mode
- From 6:00 a.m. to 3:00 p.m.: Operating in speed 2
- From 3:00 p.m. to 8:00 p.m.: Operating in speed 1
- From 8:00 p.m. to midnight: Operating in night mode
If the planner is set to ON and no time slot is selected, your air purifier operates in ACTIV mode (default mode).
Active oxygen (Feature available only on the model 600S and 1200S)
The active oxygen feature is designed for deep cleaning (once a week, for example).
Active oxygen is a very powerful natural detergent, and like bleach or chloride, this feature must
be used with caution. Active oxygen is effective against embedded odours (even in bedding),
dust mites, mould, fungus, bacteria, viruses, etc. To activate the Active oxygen feature, press the ON
button. An information message is displayed to ask if the user has read the terms of use relating to this
function. To deactivate it, press the OFF button.
Oxygène actif
Off
Pas de traitement Oxygène actif
Mode 1
Traitement faible dose - Pièce occupée
Volume à traiter
25
50 75
100
125 150 175 200 225 250
Mode 2
Traitement forte dose - Pièce innoccupée
oxygen emitted at once. The room must be unoccupied for at least 1 hour (no humans or animals present).
EN
EN
20 - EOLIS Air Manager 600 600S 1200 1200S
20 - EOLIS Air Manager 600 600S 1200 1200S
When you press the Active oxygen icon, you can select which
treatment mode to apply to your room:
OFF: No active oxygen treatment.
MODE 1: Light treatment - small amount of active oxygen emitted
regularly (every 10 min). The room can be occupied during the
m
3
treatment (minimal distance to be respected between a person
and the unit: 3 meters). Determine the volume of the room to treat
(m
: L x W x H).
3
Start
MODE 2: Curative treatment (deep clean) - strong dose of active
Publicidad
