Glacier bay HD58302-0016 Manual De Instrucciones página 4

Installation
1
Preparing for installation
□
Remove the existing showerhead
(counterclockwise) with a wrench.
□
Clean the shower arm thread.
3
Installing the showerhead
Apply the thread sealant tape (E) to the threads on
□
the diverter (B).
□ Hand-tighten the showerhead (C) (clockwise) onto
the shower arm.
5
Finishing the installation
□
Turn on the water supply, check for leaks, and
tighten as needed.
□
Place the handshower into the handshower holder.
2
4
B
C
4
Installing the diverter
□ Apply the new thread sealant tape (E) to the shower
arm. Hand-tighten the diverter (B) (clockwise) onto
the shower arm.
Installing the handshower and
hose
□
Connect the hose (D) to the remaining outlet on the
diverter (B).
□
Attach the other end of the hose to the handshower
(A).
B
E
B
A
D