Rest Heat; Features - Blomberg CTE 30400 Manual De Uso

Use & Care Manual
ENGLISH
WARNING: the timer is only intended as an acoustic
advisor that recalls the attention of the user.
Timers have no effect on the heating elements. The
cooking zone must always be stopped manually by
touching the related [OFF] key.

Rest Heat

The HOT SURFACE indicators remain on even after
the end of the cooking activity, just the necessary time
to let the surface cool down below a safety value.
Figure. 12
The residual heat time depends on the power level that
was set on the cooking zone and the time the heating
element has been working for.
For example, a cooking zone that has been working for
more than 5 minutes at full power will take half an hour
to cool down before the Residual Heat indication fades
away. At level 1 it will take about 10 minutes.

Features

The control is checking its own ambient temperature
and stops any activity in case of overheating of inner
parts. Let the appliance cool down.
13