Publicidad
2740
1
1
4740
NOTE: The deck and valve rough-in must be finished before
installing the trim kit.
Model 2740
Unscrew the test cap (1) and discard.
Model 4740
Remove set screw (1). Remove and discard test cap (2).
1
2
Screw bases (1) with gaskets (2) over end valves (3). OPTION: Use
silicone under the gasket if deck is uneven. Install spout (4) on
adapter (5). Be sure spout is resting firmly on deck. Install set screw
(6) and tighten to secure spout (4). Model 2740 proceed to step 4.
Model 4740 proceed to step 3.
5
46691
Rev. A
Publicidad
