Publicidad
Idiomas disponibles
Idiomas disponibles
Controls
Using the Remote Control
Remote Control may differ in appearance from the image
show.
QUIET
HIGH
FAN
TIMER
UP
DEHUM
LOCK
NOTE: Please remove the back of the controller and
insert two AAA batteries. Replace batteries after 6
months of use or when remote control starts to lose
power.
NOTE: DO NOT mix old and new batteries.
1. POWER
Press the POWER button to turn on the air
conditioner. When you first press the power button,
the air conditioner will operate in Energy Save mode,
Quiet fan speed and temperature of 72°F. You can
select any other mode to satisfy your needs .
2. SPEED
High - Press HIGH button to choose high fan speed.
Med - Press MED button to choose medium fan
speed.
Quiet - Press QUIET button to choose quiet fan
speed.
Auto Cool - Press AUTO button to choose auto cool
fan speed.
3. MODE
Fan - Press the FAN button to activate fan mode.
Cool - Press the COOL button to activate cool mode.
Energy Save - Press the ENERGY SAVE button to
activate fan mode.
Dehum - Press the DEHUM button to activate dehum
mode.
4. TIMER
To set the air conditioner to turn off after a set
amount of time between 1 hour and 24 hours (unit
must be ON):
49-5000633 Rev. 1
MED
AUTO
TEMP UP
ENERGY
COOL
SAVE
TEMP DOWN
TIMER
TIMER
ON/OFF
DOWN
F/C
SLEEP
LIGHT
RESET
1. Press TIMER ON/OFF button on the remote
control to select the time off function.
2. Press the TIMER + or TIMER – arrow button to
change the delay time from 1 hour to 24 hours.
Timer OFF indicator light on the air conditioner
panel will illuminate.
3. The buzzer beeps twice after 5 seconds, then
Timer OFF countdown will initiate.
To clear TIMER Program:
NOTE: Air conditioner can be either on or off.
Press TIMER ON/OFF button until Timer indicator
light turns off.
5. TEMP UP/TEMP DOWN
• Press the TEMP + button to raise the temperature.
Each time you press the TEMP + button, the
temperature will go up 1° F until it reaches 86°F
(30°C).
• Press the TEMP – button to lower the temperature.
Each time you press the TTEMP – button, the
temperature will go down 1° F until it reaches 61°F
(16°C).
6. SLEEP
1. Press SLEEP button on the remote control to
choose Sleep mode. This display will show (08)
and the indicator light will turn on.
2. The temperature will increase by 2° F one hour
after the mode is chosen. The temperature then
increases another 2° F after one hour. The until
will hold this temperature for six hours then stop.
3. To turn off Sleep mode, press the SLEEP button
until the indicator light is off.
7. FAHRENHEIT/CELSIUS
• Press the F/C button to choose between Fahrenheit
and Celsius.
8. LOCK
• Press the LOCK button on the remote control to
disable button functionality. Press the LOCK button
again to activate the remote control functionality.
9. LIGHT
• When you press the LIGHT button, the display on
the unit will turn off, but the unit is still operating
normally. When you press the LIGHT button again
or press any button on the remote control, the
display will be illuminated again.
10. RESET
• Press the RESET button to reset the unit to factory
settings.
7
Publicidad
