Descargar Imprimir esta página

tomado TSS8301S Instrucciones De Uso página 24

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 48
Breakdown
Appliance does not do
anything/ the lighting does
not work
Temperature
in the refrigerator is not cold
enough
Temperature in the
refrigerator is too cold
The refrigerator smells / has
a nasty odour
The doors do not close
properly
During normal use of the cooling appliance, different types of noises can occur that do not have any effect on the correct
operation of the appliance.
Noises that can be heard during normal use of the appliance are caused by the operation of the thermostat, compressor
(activation), cooling system (shrinkage and expansion of the material under the influence of temperature differences and flow
of cooling liquid).
ERROR MESSAGES
Error message
LED 1 and LED 6 are flashing
LED 1 and LED 3 are flashing
LED 1 and LED 5 are flashing
LED 1 and LED 4 are flashing
This symbol means that this product should not be disposed of with regular household waste (2012/19/EU).
Observe the rules that apply in your country for the separated collection of electric and electronic products.
Correct disposal of the product prevents negative consequences for the environment and for public health.
The packaging material of this product can be recycled 100%, return packaging material separately.
All manuals and user guides at all-guidesbox.com
RESOLVING FAILURES YOURSELF
Solution
Check that the plug is properly inserted in the socket.
Check if there has been a power failure in the house.
Check the plug.
Check the fuse in the group box.
Check that the refrigerator is not overfilled.
Check that the interior temperature corresponds with the set temperature.
Is the appliance located in direct sunlight or near a heat source?
Check that the ambient temperature corresponds with the climate class of the appliance.
Are the doors of the appliance opened regularly? As a result of the air humidity in the
surrounding area, a lot of humidity may accumulate in the appliance when the doors are
opened frequently.
Increase the temperature of the appliance.
The lowest temperature should only be used for quick freeze and should preferably be set
2 hours before food is placed in the appliance. If not, it is possible that the temperature of the
appliance gets below 0°C, because the compressor is continuously active.
Check if it contains food that has passed its use by date or if it contains any opened packagings.
Check whether anything has leaked on the shelves, in the compartments and in the drawers
of the refrigerator. If necessary, remove drawers to be able to check everything properly.
If something has leaked and has not been cleaned, this could eventually lead to nasty smells.
Check that the defrost water drain is not blocked and/or the receptacle for defrost water
at the rear is not full.
Check that there is nothing between the doors that prevents them from closing.
Check that the door compartments and shelves are placed properly.
Check that the door rubbers are properly placed and are not turned or torn.
Check that the appliance is level.
Description
Temperature sensor cooler section defective
Temperature sensor freezer section defective
Automatic defrosting sensor defective
Ambient temperature sensor defective
RECYCLING
EN - 24
Solution
Contact the Tomado customer service.
Contact the Tomado customer service.
Contact the Tomado customer service.
Contact the Tomado customer service.

Publicidad

loading