Publicidad
Idiomas disponibles
Idiomas disponibles
Operation
Using the Radio
Selecting a radio station:
1.
Press the Radio button to select FM1, FM2, or AM.
2.
Press either of the Tune/Track buttons to select a radio station. To "seek" (jump to the next available station),
hold either button down for a few seconds until it starts to seek a station.
Saving a radio station as a preset:
1.
Press the Radio button to select FM1, FM2, or AM.
2.
Press either of the Tune/Track buttons to select a radio station.
3.
Press and hold a numeric preset button to assign the current station to that preset number. The display will
show "SAV" to show the station has been saved.
Recalling a saved radio station preset:
1.
Press the Radio button to select FM1, FM2, or AM.
2.
To use an added preset, press a preset number once lightly to go to the stored radio station.
Pairing a Bluetooth Device
1.
Turn on your Bluetooth device.
2.
Power on Block Rocker Plus. The speaker will automatically enter pairing mode. If you have previously
connected to another Bluetooth device, Block Rocker Plus will reconnect. To disconnect pairing if the Bluetooth
icon is lit solid, press and release the Bluetooth button.
3.
Navigate to your Bluetooth device's setup screen, find "Block Rocker Plus" and connect. The Bluetooth icon
will be lit solid when paired.
Note: If your Bluetooth device prompts for a pairing code, enter "0000".
4.
To disconnect pairing, press and release the Bluetooth button.
5.
To connect to another Bluetooth device, repeat step 3.
Pairing a Bluetooth Device Using NFC
NFC (near-field communication) allows data exchange from devices, such as pairing, by gently bumping them
together. Check in your device's manual to see if this feature is supported.
To use NFC to pair with Block Rocker Plus:
1.
In order to use NFC, your device must be turned on and unlocked.
2.
Enter your device's Settings menu and check that NFC is turned On (one-time step).
3.
Power on Block Rocker Plus.
4.
Touch and briefly hold your device to the NFC logo.
5.
Follow the pairing instructions that appear on your phone. If a passcode is required, enter "0000".
6.
To unpair, gently bump your device against the NFC logo located on Block Rocker Plus's top panel.
7
Publicidad
