Descargar Imprimir esta página

Publicidad

Enlaces rápidos

1509348COM
3 Drawer Dresser
Date of Purchase ___ / ___ / ___
Lot Number:
THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE.
Keep your home and family safe
with the wall anchor kit that is
included with the product.
Serious or fatal crushing injuries can
occur from tipping furniture.
WARNING: Manufacturer assumes no liability
for improper installation or excessive loads
placed on screws or bracket. This wall anchor
is not a substitute for proper adult supervision.
Do Not Return This Product!
Contact our customer service team for help first.
Call: 1-800-489-3351 (toll free)
Monday-Friday 9am - 5pm CST
Visit: www.ameriwoodhome.com
Easy
Assembly Difficulty Meter
B341509348COM0
Tough

Publicidad

loading

Resumen de contenidos para Ameriwood HOME 1509348COM

  • Página 1 1509348COM 3 Drawer Dresser B341509348COM0 Date of Purchase ___ / ___ / ___ Lot Number: Do Not Return This Product! Contact our customer service team for help first. Call: 1-800-489-3351 (toll free) Monday-Friday 9am - 5pm CST Visit: www.ameriwoodhome.com THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE.
  • Página 2 Contact Us! Do NOT return this product! Contact our friendly customer service team first for help. Assembly Tips Call us! 1-800-489-3351 Monday-Friday 9am - 5pm CST Tube Visit ameriwoodhome.com to view the limited warranty valid in the U.S. and Canada. Helpful Hints PEOPLE NEEDED FOR ASSEMBLY: 1-2 - Open your item in the area you plan to keep it to avoid excessive heavy lifting.
  • Página 3 Before You Start Read through each step carefully and follow the proper order Separate and count all your parts and hardware Parts are labeled on the surface or edge of the part Give yourself enough room for the assembly process Have the following tools: Flat Head Screwdriver, #2 Phillips Head Screwdriver and Hammer Caution: If using a power drill or power screwdriver for screwing,...
  • Página 4 Before You Start Please Note: You may need to lightly tap the wood dowels to insert into the holes during your assembly process. wood dowel...
  • Página 5 Board Identification Not actual size Bottom Left Panel Right Panel 31509348030 31509348040 31509348020 31509348010 Support Left Front Leg Back (x2) Right Front Leg 31509000050 31509348070 31509348060 31509348080 Upper Drawer Front Drawer Front Left Rear Leg Right Rear Leg 31509348120 31509348110 31509348090 31509348100 SIDE...
  • Página 6 Board Identification Not actual size BACK Drawer Back 3999112066618B BACK Drawer Back (x2) 3999116766618B Drawer Bottom (x3) 3999134067710D SIDE SIDE BACK BACK SIDE SIDE...
  • Página 7 Part List Actual Size (x12) (x12) (x16) (x12) (x30) #A22700 #A22710 #A21670 #A21975 #A12120 cam lock cam bolt wood dowel drive fastener #8 x 7/16" screw (x30) (x12) (x2) (x12) (x6) #A11080 #A22910 #A22920 #A54510 #A17400 connector bolt connector #6 x 7/16" screw drawer bracket 8-32 x 7/8"...
  • Página 8 Part List Not Actual Size Left Cabinet Member Right Cabinet Member Left Drawer Member Right Drawer Member (x3) (x3) #A54900 #A56770 drawer brace drawer slide pkg. (x3) #A51715 handle...
  • Página 9 STEP 1 Quick Assembly Proper orientation of CAM LOCK You will need to tap the connector (7) with a hammer to fully insert. Be sure the connector is positioned as shown before tapping into hole.
  • Página 10 STEP 2 Quick Assembly Proper orientation of CAM LOCK You will need to tap the connector (7) with a hammer to fully insert. Be sure the connector is positioned as shown before tapping into hole.
  • Página 11 STEP 3...
  • Página 12 STEP 4 Turn clockwise to end view lock in place.
  • Página 13 STEP 5 end view Turn clockwise to lock in place.
  • Página 14 STEP 6 Marked with a "L" Left Cabinet Member...
  • Página 15 STEP 7 marked with a "R" Right Cabinet Member...
  • Página 16 STEP 8 Do not fully tighten screw.
  • Página 17 STEP 9...
  • Página 18 STEP 10 Note: Wood dowels (3) will insert into the end with the larger holes.
  • Página 19 STEP 11...
  • Página 20 STEP 12...
  • Página 21 STEP 13 Finished surface of backs (F) will face down. (x4) Note: Wood dowels at this end.
  • Página 22 STEP 14 Attach the top (C) as shown making sure the wood dowels (3) into the two backs (F) engage with the holes along the back edge of the top.
  • Página 23 STEP 15 Note: Steps 15 - 20 you will assemble the upper drawer. You will use the smaller drawer sides, drawer back and smaller drawer brackets (10). SIDE SIDE...
  • Página 24 STEP 16 SIDE SIDE Be sure the grooves in the drawer sides are centered with the groove in the upper drawer front.
  • Página 25 STEP 17 SIDE finished surface SIDE...
  • Página 26 STEP 18 Note: You will need to tap the drive fasteners (4) with a hammer to securely fasten. BACK SIDE SIDE...
  • Página 27 STEP 19 Left Drawer Member Right Drawer Member Attach the slides first and then the handle. SIDE SIDE...
  • Página 28 STEP 20 BACK...
  • Página 29 STEP 21 SIDE SIDE...
  • Página 30 STEP 22 SIDE SIDE...
  • Página 31 STEP 23 SIDE finished surface SIDE...
  • Página 32 STEP 24 Note: You will need to tap the drive fasteners (4) with a hammer to securely fasten. BACK SIDE SIDE...
  • Página 33 STEP 25 Left Drawer Member Right Drawer Member Attach the slides first and then the handle. BACK SIDE SIDE...
  • Página 34 STEP 26 BACK...
  • Página 35 STEP 27 For Masonry, Concrete, or other wall materials: Consult your local hardware store for appropriate anchors to securely attach the safety bracket. (x1) IMPORTANT: THIS UNIT MUST BE SECURE TO THE WALL TO HELP PREVENT TIPOVER. FOLLOW THESE INSTRUCTIONS TO INSTALL THE ANTI-TIPPING SAFETY BRACKET PROVIDED WITH THIS PRODUCT.
  • Página 36 STEP 28 Note: The drawer bracket holes are slotted. Drawer fronts can be adjusted by loosening screws, making needed adjustments and retightening screws. roller cabinet member drawer runner roller...
  • Página 37 Maximum Loads This unit has been designed to support the maximum loads shown. Exceeding these load limits could cause sagging, instability, product collapse, and/or serious injury. 50 lbs 22.7 kg 35 lbs 15.9 kg Warning: Risk of injury to persons - do not place a television on this furniture. This furniture is not approved for use with a television.
  • Página 38 Visit your local retailer's website, rate your purchased product and leave us some feedback! We would like to extend a big "Thank You" to all of our customers for taking the time to assemble this Ameriwood Home product, and to give us your valuable feedback.
  • Página 39 Español Cubierta Delantera Este libro de instrucciones contiene información IMPORTANTE de seguridad. Por favor lea y manténgalo para referencia en el futuro. No Regrese este producto! Comuniquese con nuestro amistoso equipo de servicio al cliente para obtener ayuda. Llamenos al: 1-800-489-3351 (Gratis) Lunes - Viernes 9am - 5pm CST Visitar: www.ameriwoodhome.com PRECAUCION Este mueble puede volcarse y causar graves heridas y/o muerte.
  • Página 40 Español Página 9 / 10 Deberá golpear el conector (7) con un martillo para insertarlo completamente. Asegúrese de que el conector esté colocado como se muestra antes de golpearlo en el orificio. Página 12 / 13 Gire en el sentido de las agujas del reloj para fijarlo en su sitio. Página 16 No apriete completamente el tornillo.
  • Página 41 Visite el sitio web de su tienda local, califique su comprado y denos sus comentarios! Nos gustaría enviar un gran "Agradecimiento" a todos nuestros clientes por tomarse el tiempo de ensamblar este producto de Ameriwood Home, y por darnos sus valiosos comentarios. Gracias...
  • Página 42 Français Couverture Avant CE LIVRET D'INSTRUCTION CONTIENT DES INFORMATIONS IMPORTANTES SUR LA SÉCURITÉ. VEUILLEZ LIRE ET GARDER POUR UNE RÉFÉRENCE FUTURE Ne retournez pas ce produit! Contactez notre équipe de service à la clientèle amicale d'abord pour obtenir de l'aide. Appelez-nous: 1-800-489-3351 (sans frais) du Lundi au Vendredi de 9h à...
  • Página 43 Français Page 9/10 Vous devrez taper sur le connecteur (7) avec un marteau pour l'insérer complètement. Assurez-vous que le connecteur est positionné comme illustré avant de le taper dans le trou. Page 12/13 Tourner dans le sens des aiguilles d'une montre pour verrouiller en place. Page 16 Ne serrez pas complètement la vis.
  • Página 44 Visitez le site Web de votre détaillant local, évaluez votre produit acheté et laissez-nous quelques commentaires ! Nous tenons à offrir un grand "Merci" à tous nos clients pour avoir pris le temps d'assembler ce produit "Ameriwood Home", et de nous donner vos commentaires précieux. Merci...