Publicidad
Idiomas disponibles
Idiomas disponibles
Copy the document to storage card
1.
Connect MID and computer together with USB cable.
2.
After the MTP drive installed automatically, it connects with the computer successfully.
3.
Open your computer, in my computer, examine content in "removable disk (x)".
4.
Find the document you want to copy, copy it to "removable disk(x)".
5.
After completion of copying, click "safely remove hardware" in taskbar of your
computer to unload.
Content of MID storage device
1.
NAND FLASH storage device, space for MID to store document itself.
2.
TF removable memory card.
3.
The two above-mentioned storage devices both can be visible through connection with
your computer with USB.
Attention: when your MID is connected with USB cable, if you start up USB storage
device, you will not visit the memory card through MID, if you want to
view memory card in MID, only disconnect USB cable.
3.7 Memory card
Copy the document to storage card
You can transmit document between MID and computer, such as music and picture, etc. If
you want to see documents in MID, only click the file browser to look through content in the
SD card.
Delete documents on the storage card of MID
1.
Find document you want to delete.
2.
Press the document name you need to delete, a file menu will pop up.
3.
Click delete.
Removing storage card when the MID is in starting up state
If need to remove storage card under starting up state of MID, you must unload the storage
card firstly, to avoid failure or damage of the storage card.
1.
In the homepage interface, press the menu key, then click setting.
2.
Pull the setting menu downwards, then click storage.
Publicidad
