Appendixes; Appendix A; Appendix B - JMA TRS 5000 Manual De Instrucciones

6
Various
appendices

Appendix A

6.1
The table below provides information about the Firmware,
Hardware and PC Software that you can find on the
TRS5000 machines, since they were launched until the
present day.
Firmware Hardware
Versión Versión
1.01 ---
1.04 1.0
1.04 1.1
1.04 1.1
1.05 1.1
1.06 1.1
1.06 1.1
1.06 1.1
2.02 1.1
2.0.2 1.1
2.03 1.1
6.2

Appendix B

If the TRS5000 has fi rmware version 1.06 or
earlier, the USB device is still not operative, with
functions having to be carried out via serial line
by means of the DB9 connector.
In order to be able to use the TPXCLONER, the
TRS5000 must have been updated to version
2.00 or later. In these versions the only function
of the serial line is for communication between
the TPX Cloner and the TRS5000.
PC Soft DESCRIPTION OF CHANGES
Versión
1.0 Original version of the product
1.0 Introduction of new transponders:
• TP26
• Texas Fixed Code
1.0 Autotuning function via software.
1.05 Development of new compatible PC software W98/2000/XP
1.05 Analysis and introduction of the Megamos transponders TP22, TP23,
TP24 and TP25, as well as the Texas Crypto TP20, TP21 and TP26.
1.05 Enabling of USB port on the TRS5000's base plate.
1.06 • Preparation of PC software for installing new versions of TRS5000
fi rmware.
• Implementation of control of the TRS5000 via USB.
2.0.0 Enabling of USB/RS232 adaptors for PCs that don't have standard
serial ports.
2.0.0 • Coding of HEX fi le for program updating.
• Introduction of new transponders TP27 and TP28.
• Introduction of new fi rmware for copying on TPX2.
• Introduction of a new variation of TP21.
• Introduction of Texas Crypto for Toyota and Lexus.
• Correction of algorithm for copying on TPX1 mainly for the low
range FORD models.
• Modifi cation of software and hardware in some incorrect reading
of Texas Crypto transponders when the TPXCloner was connected.
• Correction of maximum search time for the TPXCloner.
2.1.0 • Optimisation of the program installation process.
• Maintenance and customer database copying mode.
• Update for use with Windows Vista.
2.1.0 Correction of program to recognise TP12 in hardware versions 1.0
which have been updated with Version 2.02.
Date
08/08/06
21/08/06
21/09/06
25/09/06
27/12/06
14/02/07
01/06/07
22/10/07
03/01/08
17/03/08
04/05/08
21