Descargar Imprimir esta página

TCL LE39FHDF3300 Guia Del Usuario página 14

Ocultar thumbs Ver también para LE39FHDF3300:

Publicidad

Idiomas disponibles

Idiomas disponibles

Using Menu System
menu is outlined and detailed to help you get the
1. Press MENU to display the main menu.
OK
values, or use OK
submenu.
4. Press OK
5. Press MENU to return to the previous menu or
press CLEAR to close the menu.
Picture Menu
The menus for adjusting the picture are used to
obtain the best picture settings according to your
preference, the type of program you are watching
and the ambient lighting.
To access the Picture Menu, press the MENU
button on the remote to open the Main menu.
Picture, then press OK
display options.(Refer to Figure 1.)
Note: some options may be not available for certain
signal sources.
Picture Preset: displays a list that lets you select
one of the preset picture settings: Natural, Sports,
Personal or ECO, Vibrant, Cinematic. Choose the
setting that is best for your viewing environment.
Note: ECO is the default setting, if you select some
other options, the power consumption may change.
Brightness: adjusts the brightness of the picture.
Contrast: adjusts the difference between the light
Sharpness: adjusts the crispness of the edges in
the picture.
Expert Settings
Backlight:
line is grayed out by default. Only when "Dynamic
Backlight" and "Light Sensor" are both set to
"Off", the menu line can be adjustable.
Color: adjusts the richness of the color.
Tint: this option adjusts the balance between the
red and green levels.
Color Temperature: adjusts the color temperature
from cool to warm.
Note: Color and Tint are not available in PC
mode.
Advanced Settings
Light Sensor: when activated, this feature
monitors the ambient light conditions in the room
viewing. It also serves as an energy-saving
Dynamic Backlight: this option automatically
to the content of the incoming signal. Dynamic
Backlight optimizes the picture quality and
decreases power consumption.
Note: when Light Sensor or Dynamic Backlight
is set to Off, the power consumption may exceed
Noise Reduction: This setting reduces picture
"static" or any type of interference. This feature is
especially useful for providing a clearer picture in
these options:
Low for a softer, smoother picture that retains
picture sharpness and detail.
Middle for a slightly softer picture than the Low
setting.
High for an even softer, smoother picture than
the other settings (the picture detail is somewhat
decreased).
SABC (Scene Adaptive Brightness Control):
Option: On/Off. If set to On mode, distribution of
automation.
PC Settings: this option allows you to adjust the PC
settings when in PC mode.
Reset Picture Settings: this function allows you to
reset all the picture settings to the factory default
settings.
Sound Menu
The Sound Menu lets you adjust audio output. To
access the Sound Menu, press MENU on the
the Main Menu. Press OK
options will be displayed: (Refer to Figure 2.)
Equalizer:
adjust the audio frequency settings. You can select
preset.
Equalizer:
preset: Standard, Music, Voice, Movie, and
Personal.
13
Menu Operation
Sound from
sound

Publicidad

loading