Publicidad
Idiomas disponibles
Idiomas disponibles
Operation (continued)
2
Checking for low or reduced water pressure
□
Close (shut off) the water supply to the faucet.
□
Use wrenches to loosen and remove supply hose.
□
Rinse the supply hose end with screen filter in a cup of water to flush loose sediment.
□
Stubborn sediment can be removed with a small brush.
□
Inspect before re-installing onto the shut off valve.
□
Use two adjustable wrenches to connect and tighten the supply lines to the supply valves.
□
Connect the red supply line to the hot water supply valve.
□
Connect the blue supply line to the cold water supply valve.
CAUTION: Ensure the supply lines do not kink, twist or
bend into a "V" or "L" shape during installation. Do not use
if there are visible signs of damage.
3-1
3-3
Care and Cleaning
□
To clean, wipe down with a damp cloth and towel dry.
□
Do not use abrasive cleaners, steel wool, or harsh chemicals when cleaning this faucet, or the warranty will
be voided.
3-2
3-4
RED LINE
1
HOT
COLD
14
BLUE LINE
1
2
Publicidad
