Velleman PEREL PHS2000 Manual Del Usuario página 6

Insert the upper post into the middle post and fix with three M5x6 screws.
Mount the heating element onto the upper post and fix with the knob. Also, fix the power cord
into the clamp.
Adjust the angle of the heating element.
6. Operation
1. Insert the power plug into the mains.
2. Switch the appliance on/off by means of the pull switch. Select the power:
Position 0: stop
o
Position 1: 650 W (low)
o
Position 2: 1300 W (intermediate)
o
Position 3: 2000 W (high)
o
3. Switch off and disconnect the heater after use.
7. Cleaning and Maintenance
Storage
Store the appliance and its accessories in a clean and dry area.
Cleaning
Before starting any cleaning or maintenance activities, unplug the appliance from its power
source and let it cool down.
Wipe all exterior surfaces of the appliance clean with a soft cloth dampened with a soap and
water solution. Do not immerse or submerge any part of the appliance in water or any other
liquid. Never use solvents or cleaning agents containing petroleum (petrol, kerosene, oil), paint
thinner, turpentine, alcohol, or ammonia.
Maintenance
All repairs should only be carried out by qualified service personnel. Do not open exterior
casing of the appliance. There are no user-serviceable parts inside. Opening or visible attempts
to open or repair the appliance may void any guarantee and/or cause damage to the product or
personal injury.
V. 02 – 06/04/2020
All manuals and user guides at all-guidesbox.com
PHS2000
6 ©Velleman nv