Rating Plate - Case BF4 Manual Del Usuario

Please note that the incorrect polarity will cause the permanent damage to
the electronic parts.

5 Rating plate

The rating plate with the performance data can be founded on the back of
the device
6 Operation
This chapter provides important information on operating the device.
Follow the instructions in order to avoid danger and damage.
6.1 What is body fat percentage?
The body fat percentage is derived from the ratio between body weight
and body fat.
6.2 Measurement of the body fat percentage
To determine the body fat percentage, the BIA-method (bioelectrical
impedance analysis) has been developed.
The resistance of the body is measured while a small and harmless
electric current is sent through the body. The resistance is higher in
adipose tissue while the current flows more easily in fat-free mass. Due to
the measurement of resistance with the body size of the person, its age
and sex, it is possible to estimate the percentage of fat and water of the
body.
The percentage of fat is influenced by the hydration of the body. Some
hours after standing up, the percentage of body fat is influenced by the
supply of water. And when you measure yourself at different times of the
day, you will also realize a slight difference between the measured data.
With this method measurements under consistent conditions (same time of
the day and same measurement conditions) will lead to best results.
The percentage of body fat is also influenced by other factors like type of
nutrition or heavy training.
caso Personenwaage BF4
Insert the batteries
Pull the battery cover in the arrow direction
Install 4 x 1.5 AA batteries as shown.
After installing the batteries, put back the
battery cover and push the cover back.
To replace the batteries, take out one in the
middle from the negative pole to the others.
8