Sinmag Europe SM710E Manual página 11

3. BAKING IN AUTO MODE
A.
Before choosing your program make sure the auto mode
B.
Select the program with direct buttons (1-6)
C.
Push start.
D. The oven will heat up till the T° you selected in the pre-heating step..
E.
Once the T° is reached the "ready" lamp
a signal.
F.
By opening the door you stop the oven.
G. Once you have loaded your product and closed the door, push start.
H.
The ovens will now follow the steps of your program.
I.
On the timer display
J.
Once the program is completed the signal will ring.
K.
You can stop it by opening the door or push on stop.
L. During the baking process if you wish to by-pass a step you can push on
the step button
4. BAKING IN MANU MODE
A.
Before starting make sure the "Manu" mode
B.
Adjust the T° with the T° setting buttons.
C. On the T° display (red)
D.
Once the requested T° is reached you can put your product in the oven.
E.
Adjust the time with the timer setting buttons
F.
Adjust the steam time with the arrows
G. Open or close the key with the button
H.
To start the baking process push start
I.
Once the time is elapsed you will hear the signal.
J.
Open the door or push stop
13
you see the remaining baking time.
3
or change time with the timer setting
7
you see the T° of the oven.
20
.
SINMAG EUROPE BVBA
1
or with the arrows
10
will switch on and you will hear
20
14
24
is activated.
11
14
.
18
.
23
. If the lamp is on the key is open.
19
24
is activated.
6
.
19
.
ENG
11