Publicidad
Idiomas disponibles
Idiomas disponibles
INSTALLATION
Always connect the camera in the same way, regardless of whether the camera
is connected to a permanently installed PC or a mobile laptop.
1) Connect the camera to the DC12V power supply and plug it in to power.
As soon as the LED (3) lights up, the camera is switched on and ready for
operation.
Note: Make sure that the camera is free of packaging material and that no
objects are blocking the camera's range of movements. The camera will centre
itself in the beginning. It is not necessary to align the camera by hand.
2) Connect the camera with the USB A-A cable and connect it to the PC.
Optionally, the camera can also be controlled with an RS232 data cable
(DIN8M) (not included in the box).
3) Connect the microphone & loudspeaker module with the other USB cable to
a free USB port on your PC.
4) As soon as the PC has recognised the camera and microphone & loudspe-
aker module, the conference system can be started. The system can be used
with all common video conferencing programs.
5
Publicidad
