WERKU WK403160 Manual De Instrucciones página 2

ENG ORIGINAL INSTRUCTIONS
CE DECLARATION CONFORMITY.
Werku ® declares that the WK403160 reciprocating
saw is in accordance with the following Directives
and Standards:
2006/42/EC
2014/30/EU
EN 60745-1:2009+A11
EN 60745-2-11:2010
EN IEC 55014-1:2021
EN IEC 55014-2:2021
EN IEC 61000-3-2:2019+A1
EN 61000-3-3:2013+A1
AfPS GS 2014:01
La Coruña, 01/07/2022
R Yáñez
Werku Tools SA
TECHNICAL CHARACTERISTICS.
Voltage-frequency .............................. 230V~50Hz
Power .......................................................... 710W
Class .................................................................. II
Protection index ........................................... IPX0
Speed rate ....................................... 0-2600 min-1
Stroke blade ............................................... 20 mm
Wood cutting capacity ............................... 115 mm
Metal cutting capacity ................................. 10 mm
Graduation ............................................. 0º-45º-90º
Net weight ................................................. 2.6 kg
Acoustic pressure LpA .......................... 84.17 dB(A)
Respective uncertainity K ........................... 5 dB(A)
Acoustic power LwA ............................ 95.17 dB(A)
Respective uncertainity K ......................... 5 dB(A)
Vibration Ah - main handle - board ....... 15.915 m/s²
Vibration Ah - auxiliary handle - board ..13.264 m/s²
Vibration Ah - main handle - beam ....... 12.980 m/s²
Vibration Ah - auxiliary handle - beam ..15.902 m/s²
Respective uncertainity K ..........................1.5 m/s²
VIBRATION.
The declared vibration total value has been
measured in accordance with a standard test method
and may be used for comparing one power tool with
another. The declared vibration total value may also
be used in a preliminary assessment of exposure.
Warning: vibration emission during actual use of the
power tool can differ from the declared total value
depending on the ways in which the power tool is
used. Warning: identify safety measures to protect
the operator, based on an estimation of exposure in
the actual conditions of use.
PICTOGRAMS.
Read instruction manual
Wear eye protection
Wear ear protection
Wear hand protection
Double insulation
European conformity
2002/96/CE directive
SAFETY INSTRUCTIONS.
Read all security warnings and all instructions. Failu-
re to follow all warnings and instructions listed below
may result in electrical shock, fire and/or serious in-
jury. Keep all warnings and all instructions for future
reference. Accidents can be avoided in many cases
by recognizing a potentially hazardous situation be-
fore it occurs and by observing appropriate safe-
ty procedures. Do not use this power tool for other
applications than those specified in this manual.
WORK AREA SAFETY.
Keep work area clean and well lit. Cluttered and dark
areas invite accidents. Do not operate this power tool
near flammable materials. Sparks could ignite these
materials. Keep away from children and curious
while operating this power tool. Distractions can
cause you to lose control. Keep bystanders a safe
distance away from work area. Anyone entering the
work area must wear personal protective equipment.
Fragments of work piece or of a broken accessory
may fly away and cause injury beyond immediate
area of operation.
2
English
TÜV Rheinland certification