Publicidad
Idiomas disponibles
Idiomas disponibles
6. INSTRUCTION OF USE
The heating mattress pad must be placed between the mattress and the first sheet, not over
the bed or people.
ATTENTION!
The heating mattress pad can only be used with the control supplied. The
relative model is specified on the label sewn on the panel.
6.1 How to place the heating mattress pad
(Image for illustrative purpose only)
1. Place the mattress pad directly on the mattress, with the plug facing the mattress.
Make sure it is stretched out and secure it with the straps provided. DO NOT place the
heating mattress pad under the pillow.
2. Place the first sheet over the mattress pad and prepare the bed as usual.
3. Insert the socket of the control into the plug to connect the adjustment control of
the temperature to the mattress pad. For the double model it is necessary to repeat
the operation also for the second grip. Unplug the heating mattress pad pressing
the levers on the sides of the plug. Insert the plug of the control cable into the
socket. Select the desired temperature by turning the knob adjustment. Select the
high pre-heating temperature to obtain a rapid heating. Select temperatures 1 to 4
for prolonged heating.
- Level 0 = off
- Level 1 = Minimum temperature
- Level 2 = Average temperature
- Level 3 = Maximum temperature
6.2 Automatic switch-off function
• The heating mattress pad is provided with an automatic switch-off system. After 180
minutes of functioning it automatically turns off.
• To turn the device on once again, place the temperature selector in position "0", wait a few
seconds, then select the desired temperature once again.
6.3 Switch-off
• Switch the heating mattress pad off by placing the temperature selector in position "0".
• Remove the plug from the socket.
7
Publicidad
