Publicidad
Idiomas disponibles
Idiomas disponibles
Setup • Assemblage • Configuración
1.
Align the back of the Plug to the Doorbell Power Adapter
prongs, and then press the Plug into the Power Adapter.
2.
Turn the Plug clockwise. You will hear a "click" when
locked in place.
3.
Connect the Cable to the Power Adapter.
4.
Select an outlet near the doorbell.
5.
Run the cable from the doorbell to the outlet.
6.
(Optional)
Secure the cable using the provided cable
clips.
7.
(Optional)
To install the doorbell without any gaps
between the doorbell and the wall, drill 2 holes to run the
Cable through the wall.
Always be careful of existing wiring, pipes or other hazards when drilling.
If you are not comfortable doing it yourself, consult a licensed electrician or installer
Publicidad
